Strength and Durability of Vermi-Improved Crude Oil Contaminated Lateritic Soil Stabilised with Iron Ore Tailings for Road Subgrade Applications.
Abstract
Crude oil contamination degrades the shear strength and durability of lateritic soils used for road construction, and while vermi-improvement can reduce hydrocarbon content, the resulting soil typically still lacks adequate load-bearing capacity; combining biological remediation with waste-derived mineral stabilisers such as iron ore tailings (IOT) offers a largely unexplored dual pathway for reclaiming such soils for pavement use. This study investigated the strength and durability characteristics of vermi-improved crude oil contaminated lateritic soil stabilised with iron ore tailings (IOT) for road subgrade applications. Following vermi-improvement with Eudrilus eugeniae (African nightcrawler earthworm) and stabilisation with 0-8% IOT, unconfined compressive strength (UCS), California bearing ratio (CBR), and durability were evaluated under British Standard Light (BSL), West African Standard (WAS), and British Standard Heavy (BSH) compactive efforts. Linear regression analysis demonstrated highly significant positive correlations between IOT content and UCS at 28 days for all compactive efforts (R2 = 0.851-0.978, p < 0.05). Soaked CBR exceeded the 8% subgrade minimum at 8% IOT across all compactive efforts (BSL WAS, BSH), with the strongest correlation under BSH compaction (R2 = 0.943, p = 0.006). Durability improved significantly with IOT addition, particularly under BSH compaction. SEM analysis revealed denser microstructures with increasing IOT content and curing age. These findings confirm that the combination of vermi-improvement and IOT stabilisation produces a material with adequate strength and durability for road subgrade construction, offering pavement engineers a practical, waste-based dual remediation-stabilisation strategy for reclaiming petroleum-contaminated land for road infrastructure development.References
Adamu, M., Ibrahim, A. M., and Mohammed, S. (2023). Geotechnical properties of crude oil contaminated lateritic soil in northern Nigeria. Nigerian Journal of Technological Development, 20(2), 78-89.
Adamu, M., Suleiman, A. R., and Hassan, D. S. (2024). Effects of vermi-remediation on the engineering properties of petroleum contaminated soils. Environmental Geotechnics, 11(3), 189-201.
Adeyemi, G. O., Ojelabi, E. A., and Oluwapelumi, O. (2023). Vermi-remediation of petroleum hydrocarbon contaminated soils: Earthworm species and microbial dynamics. Environmental Earth Sciences, 82(12), 245.
Akinyemi, B. A., Baiyegunhi, J. S., and Oloruntola, M. O. (2022). Geotechnical evaluation of crude oil contaminated lateritic soils for construction purposes. Journal of Rock Mechanics and Geotechnical Engineering, 14(5), 1567-1578.
Akinyemi, B. A., Ogundiran, M. B., and Olayinka, A. (2023). Utilisation of iron ore tailings for stabilisation of expansive soils. Construction and Building Materials, 395, 132456.
Amu, O. O., Ayoola, A. R., and Ogunjimi, O. O. (2024). Geotechnical applications of iron ore tailings in soil stabilisation. Journal of Materials in Civil Engineering, 36(3), 04024015.
ASTM D559 (2003). Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures. ASTM International, West Conshohocken, PA.
BS 1377 (1990). Methods of Test for Soils for Civil Engineering Purposes. British Standards Institution, London.
Eberemu, A. O., Jibril, G. O., and Osinubi, K. J. (2025). Compaction behaviour of lateritic soils treated with iron-rich industrial wastes. Journal of Transportation Engineering, 151(2), 04024189.
Fatima, R., and Singh, S. (2024). Vermi-remediation of hydrocarbon-contaminated soil: Process optimisation and microbial community analysis. Bioresource Technology, 395, 130245.
Federal Ministry of Works and Housing (2016). General Specifications for Roads and Bridges. Federal Government of Nigeria Press, Abuja.
Jibril, G. O., Eberemu, A. O., and Osinubi, K. J. (2024). Mineralogical and pozzolanic characterisation of Nigerian iron ore tailings for geotechnical applications. Journal of Materials Research and Technology, 28, 6789-6802.
Oduola, B. J., Adeyemi, G. O., and Oloruntola, M. O. (2023). Crude oil contamination effects on soil and groundwater resources in the Niger Delta region. Environmental Earth Sciences, 82(15), 389.
Ogundipe, O., and Adekanmi, J. (2019). Assessment of the effects of lime and cement on geotechnical properties of laterites. FUOYE Journal of Engineering and Technology, 4(2), 11-15.
Ojuri, O., Adavi, A., and Oluwatuyi, O. (2017). Geotechnical and environmental evaluation of lime-cement stabilised soil-mine tailing mixtures for highway construction. Transportation Geotechnics, 10, 1-12.
Okunade, E. A. (2010). Geotechnical properties of some coal fly ash stabilised Southwestern Nigeria lateritic soils. Modern Applied Science, 4(4), 66-73.
Ola, S. A. (1978). Geotechnical properties and behaviour of some stabilised Nigeria lateritic soils. Engineering Geology, 12(2), 145-160.
Olufemi, J. R., Ogundiran, M. B., and Olayinka, A. (2023). Effects of iron ore tailings on the geotechnical properties of petroleum contaminated lateritic soil. Construction and Building Materials, 385, 131567.
Osinubi, K. J., Ijimdiya, T. S., and Eberemu, A. O. (2017). Performance of lime and RHA on geotechnical properties of black cotton soil. Transportation Geotechnics, 11, 42-51.
Osinubi, K. J., Eberemu, A. O., and Ijimdiya, T. S. (2019). Performance evaluation of RHA-lime stabilised black cotton soil. Transportation Geotechnics, 21, 100269.
Osinubi, K. J., Eberemu, A. O., and Jibril, G. O. (2024). Strength and volume change characteristics of cement-stabilised lateritic soil under compaction. Transportation Geotechnics, 42, 101156.
Sulaimon, A. N., Adeyemi, G. O., and Ogedengbe, K. (2023). Geotechnical characteristics of crude oil contaminated lateritic soils in southern Nigeria. Environmental Monitoring and Assessment, 195(8), 423.
Copyright (c) 2026 Hayatudeen M. Idris, John E. Sani, George Moses

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors hereby represent and warrant that the paper is original and that they are the authors of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. If in future any violation of any copyright come in notice, then the author will be responsible and not FUOYEJET.
The authors declare that:
- This paper has not been published in the same form elsewhere.
- It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
- A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, the copyright after publication belongs to the Author(s) (for articles published in 2020 and beyond) and licensed under the creative commons license CC-BY-NC (http://creativecommons.org/licenses/by-nc/4.0). The copyright covers the right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.